A.10.2. CV-1144-0
PRODUCT
Type			Controlled volatility RTV silicone atomic oxygen overcoat
Chemical Composition			Dimethyl Diphenyl Silicone Polymer
Manufacturer	Nusil Technology 1150 Mark Avenue, Carpinteria, CA 93013 USA			Tel: +1 805 684 8780 Fax: +1 805 566 990 Email: steveb@nusil.com www.nusil.com
European Agent	Polymer Systems Technology Ltd. Unit 6, First Floor, Vernon Bldg, Westbourne St, High Wycombe UK			Tel: +44 (0)1494 446610 Fax: +44 (0)1494 528611 Email: Poly.systechltd@btinternet.com
EXPERIENCE & AVAILABILITY
Development Status			Special Commercial Product
Cost Range			High
Lot Reproducibility			Good
Space Experience			Good
GENERAL PROPERTIES (Physical, Mechanical, Thermal, Electrical, Optical)
Nature			Typical Value		Remarks
Appearance			Clear, elastomer
Viscosity			265 ± 50 cps		Manufacturer’s Data
Refractive Index			1.43 ± 0.05		Manufacturer’s Data
Nonvolatile Content			60 ± 2%		Manufacturer’s Data
Shelf Life			6 Months		@ 25°C, Refrigeration may extend shelf life.
PROPERTIES RELEVANT TO SPACE USE
Nature		Typical Value				Type of Test
Temperature Range		-115°C to +232°C.				Manufacturer’s Data
Outgassing		TML = 0.30%, RML =0.25%, CVCM = 0.01%				ECSS-Q-70-02
SPECIAL RECOMMENDATIONS
· CV-1144-0 is normally self bonding. If a primer is required, Nusil SP-120 Silicone primer is recommended. · Cure times at 25°C and 50% RH: - Tack-free time – 1 hour. - Time to handling – 24 hours.