A.14.3.
|
|||||
PRODUCT |
|||||
Type |
Controlled-volatility electrically-conductive RTV
silicone adhesive sealant. |
||||
Chemical Composition |
Phenyl Silicone Polymer - Carbon. |
||||
Manufacturer |
Nusil Technology 1150
Mark Avenue, Carpinteria,
CA 93013 USA |
Tel: +1 805 684 8780 Fax: +1 805 566 990 Email: steveb@nusil.com www.nusil.com |
|||
European Agent |
Polymer Systems Technology Ltd. Unit 6,
First Floor, Vernon Bldg, Westbourne
St, High Wycombe UK |
Tel: +44 (0)1494 446610 Fax: +44 (0)1494 528611 Email: Poly.systechltd@btinternet.com |
|||
EXPERIENCE & AVAILABILITY |
|||||
Development Status |
Special Commercial Product |
||||
Cost Range |
High |
||||
Lot Reproducibility |
Good |
||||
Space Experience |
Limited |
||||
GENERAL PROPERTIES (Physical,
Mechanical, Thermal, Electrical, Optical) |
|||||
Nature |
Typical Value |
Remarks |
|||
Appearance |
Black elastomer |
|
|||
Consistency |
Non-slump |
|
|||
Specific Gravity |
1.24 ±
0.02 |
25°C |
|||
Hardness |
60 minimum |
Durometer, Type A |
|||
Tensile Strength |
3.1 MPa minimum |
Manufacturer’s Data |
|||
Elongation |
20% minimum |
Manufacturer’s Data |
|||
Volume Resistivity |
0.015 W
m |
Manufacturer’s Data |
|||
Shelf Life |
6 Months |
25°C. Refrigeration may extend shelf life. |
|||
PROPERTIES RELEVANT TO SPACE USE (Effects of and/or on environment) |
|||||
Nature |
Typical Value |
Type of Test |
|||
Outgassing |
TML = 0.29%, RML = 0.25%, CVCM = 0.02% |
ECSS-Q-70-02 |
|||
Temperature Range |
-115°C to 260°C |
Manufacturer’s Data |
|||
Thermal Cycling |
Pass |
ECSS-Q-70-04 |
|||
SPECIAL RECOMMENDATIONS |
|||||
·
A primer may be required on some bonding
applications. Nusil SP-120 silicone primer is recommended. ·
Cure time at 25°C and 50% RH: -
Tack-free time – 30 minutes. - Full
cure – 7 days. ·
Thick sections may require extended cure times. |
|||||